Clissal C1 Hospital Grade Cleaner
Hospital-grade surface disinfection for high-traffic clinical environments
Manufactured by Jaivin Surfactants at our ISO 9001:2015 certified Tirupati facility. NABL-tested efficacy. SDS and COA available for all procurement documentation requirements.
Key features and benefits
- Kills ≥99.99 % gram-positive and gram-negative bacteria on first contact
- Effective against HAI pathogens including MRSA and VRE
- Non-corrosive on stainless steel, PVC, ceramic and vinyl flooring
- Low odour — safe in patient-facing wards and neonatal units
- Concentrated formula: 5 × cost savings versus ready-to-use alternatives
- SDS, COA and efficacy data sheets available for procurement and NABH audits
Technical specifications
| Parameter | Details |
|---|---|
| Active ingredient | Quaternary Ammonium Compound (QAC) — 400 ppm at use-dilution |
| pH (concentrate) | 7.5 ± 0.5 |
| Dilution range | 1:50 (routine) to 1:200 (light soils) |
| Pack sizes | 1 L | 5 L | 20 L | 210 L |
| Shelf life | 24 months from manufacture date |
| Certifications | FSSAI Schedule 4 compliant · ISO 9001:2015 · NABL-verified efficacy |
Where to use Clissal C1 Hospital Grade Cleaner
High-contact and frequently cleaned surfaces requiring Clissal C1 Hospital Grade Cleaner chemistry.
High-contact and frequently cleaned surfaces requiring Clissal C1 Hospital Grade Cleaner chemistry.
High-contact and frequently cleaned surfaces requiring Clissal C1 Hospital Grade Cleaner chemistry.
High-contact and frequently cleaned surfaces requiring Clissal C1 Hospital Grade Cleaner chemistry.
High-contact and frequently cleaned surfaces requiring Clissal C1 Hospital Grade Cleaner chemistry.
How to use
- Dilute 1 part C1 in 50 to 200 parts clean water depending on soil level
- Apply to pre-cleaned surface using mop, cloth or low-pressure spray
- Allow 5-minute contact time for full broad-spectrum efficacy
- No rinse required at standard 1:50 dilution; rinse if protocol specifies
- Dispose of used solution per your facility's SOP and waste management plan
Compliance and certifications
- FSSAI Schedule 4 compliant · ISO 9001:2015 · NABL-verified efficacy
- Safety Data Sheet (SDS) — GHS format, available on request
- Certificate of Analysis (COA) — batch specific, traceable to manufacturing records
- FSSAI Schedule 4 compliance declaration — where applicable
Frequently asked questions
Is C1 approved for food-contact surfaces?
C1 is formulated for general and high-contact surfaces in healthcare environments. For food-contact surfaces Clissal recommends Vandax or Alsan S7, which carry direct FSSAI Schedule 4 compliance.
What is the kill-contact time?
5 minutes at 1:50 dilution against common nosocomial pathogens. Full NABL efficacy reports are available from Clissal sales on request.
Is C1 safe for use around patients?
Yes. At recommended dilution C1 has low residual odour and low skin-irritation potential. Ventilate the area during application as standard infection-control practice.
Ready to trial Clissal C1 Hospital Grade Cleaner at your facility?
Submit your contact details and we'll send a documentation pack and sample request form within 24 hours.
Contact Clissal for bulk pricing, distributor details and technical support.